Cold Spring Commercial Roof Repair Contractor

Patching a seam or puncture, resealing flashing, refastening trim, and replacing screws with new washers. These fix existing details without adding roof area or changing the structure, so they are the quickest to schedule once the inspection confirms the damage.

Replacing a section of membrane over wet insulation, swapping deck panels, replacing metal panels, or adding and moving rooftop curbs. Those change the roof enough to ask about review first, and they usually need more planning for materials and weather.

If a question comes up later from a buyer, an insurer, or the city, the note shows the work was checked before it started. Filing it with the invoice keeps it easy to find years later, when nobody remembers the phone call.

Yes. A temporary repair with wet-surface materials stops water in the meantime, and the permanent work follows once the scope is confirmed. Both visits are recorded, and the temporary patch comes off before the permanent repair goes on.

The roof type, the size of the damaged area in square feet, whether deck or framing is involved, and any curb, drain, or scupper changes. A short written scope from the inspection gives the offices everything they need to answer.

Adding or moving a curb changes the roof, so it is worth asking the city and county before the equipment goes in. The roof side of that work includes new curb flashing, crickets behind wide units, and sealing old penetrations, and those details belong in the description you give the offices.

The membrane flashing at the curb is cut back to solid sheet that is still firmly attached, the corners get preformed patches, and the counterflashing is refastened tight to the curb. A cricket goes in behind wide curbs that hold water, and the equipment installer hears what was found so the next unit goes in cleaner.